SHOE PATTERN - BALLET PUMP
SHOE PATTERN - BALLET PUMP
SHOE PATTERN - BALLET PUMP
SHOE PATTERN - BALLET PUMP
SHOE PATTERN - BALLET PUMP
SHOE PATTERN - BALLET PUMP

Regular price£0.00
/
Tax included (UK customers only). Shipping calculated at checkout.
Download and print our pre-made shoe patterns! OMG it's free! We believe that the court shoe is the best place to start for beginners. You'll learn so much about shoemaking process from making a simple shoe like this, that's why we've made these patterns free in an effort to make shoemaking a more accessible craft.
Each pattern is a PDF digital file that you can download instantly and print from home. This court shoe / pump upper pattern is designed to be used alongside the I Can Make Shoes womens flat lasts (reference 001).
The pump is the perfect construction to make when you are starting your shoemaking journey. It's also a classic design that transverses all seasons and trumps all shoe trends 🥿
Read full product description below 👇

  • Worldwide shipping
  • In stock
  • Inventory on the way

Download and print our pre-made shoe patterns!

OMG it's free?! We believe that the court shoe is the best place to start for beginners. You'll learn so much about shoemaking process from making a simple shoe like this, that's why we've made these patterns free in an effort to make shoemaking a more accessible craft.

Each pattern is a PDF digital file that you can download instantly and print from home. This court shoe / pump upper pattern is designed to be used alongside the I Can Make Shoes womens flat lasts (reference 001). 

The pump is the perfect construction to make when you are starting your shoemaking journey. It's also a classic design that transverses all seasons and trumps all shoe trends 🥿

MORE ABOUT THIS PATTERN..

This is a 3/4 cut court shoe pattern which means there is a full closed side seam and back seam. The pattern is the same for the upper and lining, the only difference being you would fold the 5mm allowance on the topline of the upper and this 5mm will become the trimming allowance on the topline of the lining.

You may be wondering... Why is that extra inside quarter pattern not part of the rest of the pattern so it can just be one continuous piece?

There are 2 reasons for this...the first being that for some sizes and heel heights the angle of the pattern for a court shoe means that the pattern would overlap itself at the back here. The second reason we break up the pattern here is so that you can get more out of your materials as there is less dead space within or around the pattern pieces 😊

If you have altered your last for a square/pointed toe or adjusted the width, we recommend adding on some extra lasting allowance to the pattern, to accommodate this build-up.

CLOSING SEQUENCE...

1. Trace and cut out the linings and uppers in your chosen material using the same pattern. *Remember to flip the pattern pieces to get left and right feet*

2. Stitch together all back seams and side seams, 5mm in from the edge. Open the seams with a little glue and skive away excess bulk.

3. Glue and fold over the 5mm allowance on the toplines of your uppers.

4. Match together the uppers with the linings and stitch together at the topline. *The 5mm trimming allowance on your linings will sit 5mm above the topline of your uppers.*

5. Trim off the front half of the trimming allowance, leaving some at the back to help with the lasting process.

You're now ready to last your uppers!


Recently viewed